MIG 180FL
The semi-automatic MIG 180FL welder is used for manual welding of steel and non-ferrous metals. It can be used as MIG/MAG and MMA (covered electrode) welding . By changing the polarity, the device allows you to weld using both standard wires in a protective gas shield and self-shielding flux-cored wires. The welder is made in IGBT inverter technology , which allowed to significantly reduce its weight and dimensions. MIG 180FL works with wire spools D100 (1kg).
The welder is equipped with an integrated MIG welding torch, electrode cable and ground cable with a ground clamp.
Welding/cutting/other methods | MIG/MAG , MMA DC |
Supply voltage [V] | AC 230 |
Manufacturing technology | IGBT |
Max MMA welding current [A] | 160 |
Max MIG/MAG welding current [A] | 180 |
MMA duty cycle [%] | 60 |
MIG/MAG duty cycle [%] | 60 |
No-load voltage [V] | 58 |
Wire feed speed [m/min] | 2 - 13 |
MIG welding voltage [V] | 15.6 - 21.2 |
Max power consumption MMA [kVA} | 6.1 |
Max power consumption MIG/MAG [kVA] | 6.1 |
Max current consumption MMA [A] | 23 |
Max current consumption MIG/MAG [A] | 21 |
Wed. wire spool ø [mm] | 100 |
Roll dimensions [mm] | 28×8 (7×7) |
The main method | MIG/MAG |
Functions | 2-roll feeder , Welding without gas , Analogue control , LED display |
Grid protection [A] | 16 |
